CyanMobile reVo A For Samsung Galaxy Mini/Pop/Next GT-S5570.

                                                     HOW TO FLASH CyanMobile reVo A.

Disclaimer : Do It At Your Own Risk!

Note : Those who have Gingerbread OS and any Custom Recovery installed on their device can skip Step 1 and Step 2. Also, those who have any custom rom installed can skip both Step 1 and 2.

Upgrade your firmware to Gingerbread using Odin Multidownloader v4.38

2. Install CWM custom recovery available for Samsung Galaxy Mini/Pop/Next from here

3. Download CyanMobile reVo A (update-CyanMobile-reVo-A-GalaxyMini-20120421-Release.zip)


3.2. Download Fix Bluetooth & Video Playback (update-fix-bluetoothAndVideo-Mini.zip)

4. Copy the downloaded file to your sd-card.

5. Reboot your device to Custom Recovery (Press Home + Power Button).

8.Sd- partition Require above 500 MB(at CWM RECOVERY)
WITHOUT SD- PARTITION YOU FACE "AUTOMATICALLY REBOOT PROBLEM"

(If you already partition your Sd-card Go to "Mount & Storage" Option on CWM recovery & Select format Sd ext)  

9.After Sd- partition Go to "Mount & Storage" Option on CWM recovery & Select Format system format Sd ext

7. NOW Go on Choose Install Zip From Sd Card>Choose Zip From SD Card option and then select the file (named:update-CyanMobile-reVo-A-GalaxyMini-20120421-Release.zip & update-fix-bluetoothAndVideo-Mini.zip you downloaded from above) [first flash Rom after flash Update Zip]

8. Wait till the rom is flashed/installed on your device. Once done, Wipe Data and Wipe cache from recovery menu.

9. Reboot your device from your recovery main menu.

 THANK YOU TO THE DEV OF THIS AWESOME FULLY FEATURE ROM                                                Yanuar Harry(SQUADZONE)

                    To Solve Automatically "HOT REBOOT" Problem.

- Go To CyanMobile Settings>> Performance>>Tick On "Kernel Same page Merging">>KSM Sleep Time-2500>>KSM Page scan-512>>VM heap size-48m>>Low Mem Killer-Hard Multitasking.

Now Restart Your Device One time

SPACIAL THANKS TO  :-
"KHAIRUL AZUAN MOHD RADZI"_"JAN MAE"_"SIGIT HERMAWAN"_"KAUSHAL ROX (IT'S ME :-P)_"YANUAR HARRY(SQUADZONE) "

FOR HELP ME TO FIX THIS AUTOMATICALLY REBOOT PROBLEM ....

THANK YOU EVERY ONE FOR VISITING BLOG.....

HAVE A NICE DAY  :D
   

         

Hero Tower Defense Thursday: Day 36 - Current Progress! Community Request: Crafting!

Want to get the legendary dogs? Shiny Mew? or any other shiny pokemon in the game? Adopt them today using SnD coins! Click here for more info.

Welcome to Hero Tower Defense Thursday!

HTD Logo

Go here to read Day 35 of Hero Tower Defense Thursday.

Play Hero Tower Defense!

There won't be a release this week because Sam had some finals to study for but everyone has been working on things that'll be in the next update. Now that we have several artists helping us out we should be able to start adding more content each release. Loot drops, equipment/inventory saving, and character progression are soon to come along with some other things. We've also been researching more ways to improve performance and prepare for other platforms.

Some other changes we may be making is increasing the available unit placements for the heroes. Most unavailable spaces would just be blocked by some sort of environmental obstacle or away from the edges to prevent some other issues. However, there will also be another layer of placements to accommodate non-grounded units like flying pets or a hero with a levitation effect on them. This will allow for more variation and strategy which is always nice.

Another topic of discussion lately has been crafting/trade skills/professions (whatever you want to call them) and how they could work. We plan to have a lot of flexibility when it comes to changing the customization of your heroes. For example, you'll be able to change their hair color and hairstyle by doing something simple such as going to a nearby town. You'll also be able to alter the look and stats of your weapons through blacksmithing (either in town or perhaps through one of your characters). So say you have a sword with good stats and then you find a cooler looking sword later on that you like but it doesn't have very good stats, or vice versa. You could use a blacksmith to change your current sword to look like the other sword. So now you have a sword with the same stats but it has the new look. There may be some limitation to this in that it has to be the same type, e.g. a sword to a sword, not a sword to mace. The same could be used for customizing the way your armor looks.

Of course, you'll also be able to gather materials and create weapons from scratch. This would probably work like your typical RPG and allow you to break down other items to gain materials. Also, you'll likely acquire rare materials from bosses and quests that could lead to more powerful items.

we're throwing around some other ideas for crafting but I'm curious to hear from you guys about what you'd like to see or any ideas you might have. So leave us some of your suggestions in the comments and we'll be sure to check them out, thanks!

In the Works:

Design

• Story: Intro - Scene 1 (10%)
• Pet System (50%)

Graphics

• Inventory Screen (0%)
• Skill Selection Screen (0%)
• Light Skill: Radiate (Native) (10%)
• Light Skill: Shinning Strike(T1 Physical) (10%)
• Light Skill: Fleeting Light (T1 Magical) (10%)
• Unit: Fire Gecko - Movement (100%)
• Weapon: Edged Boomerang (100%)
• Weapon: Tall Axe (100%)
• Weapon: Boomerang (100%)
• Weapon: Spiked Club (100%)
• Weapon: Claw Knife (100%)
• Weapon: Basic Crossbow (100%)
• Weapon: Flintlock (100%)

Programming

• Saving Inventory and Equipment Setup (0%)

Check out Kevin's blog, KXN @ HTD for HTD art-related concepts, WIPs, polls, and more!

Let us hear any of your crafting ideas or other suggestions in the comments, all feedback is welcome!


-Dan

Bugs in Delight Belle for C7 fixed.

Hey friends..

Delight Belle v5.2 for C7 post is updated with new fixed rofs2 for English and other languages as well.

Led and flash light related bugs are fixed and all is working fine now..

So flash again and enjoy.. :)

Emanon v6 [Custom Rom] For Galaxy Mini/Pop/Next

Download Link:

emanoNROM-v6-signed.zip

1.How To Install It?

2.Change Log:

1. Added Glass Epic & Facinates lockscreen
2.  long press back key to kill background app
3.  long press volume key in screen off to skip/back music tracks
4.  Battery Bar
5.  clock,signal & Battery options
6.  Statusbar colour & transparency
7.  CRT on Animations
8.  remove registration of FM radio on Airplane mod
9.  Removed social HUb
10.  Cache partition Back to EXT 4
11.  Enable skin chooser in MMS app
12.  statusbar toggle icons back to original theme
13.  Intergrated UV kernal in ROm

Lock screen:

Tweaks:

stutus bar tweaks

other tweaks

Thanks to parasmi and his continuous dedication towards the development of Samsung Galaxy Mini GT-S5570 handset.

How to Install Custom Rom RazoDroid v4.0 Based On DDKT3(2.3.6)

Steps to install RazoDroid v4.0 Based On DDKT3(2.3.6)

This is just tutorials for newbies on how to flash new roms step by step instructions and also i like to tell that it is risky that it would brick your phone.So go through the instructions very well and then proceed. Mobtechzz will not be responsible for brick. It voids warranty. These are the works of great developers not mine.I am doing this jut to make easy to newbies.

RazoDroid v4 is a custom rom and some of the screenshots

Prime Requisites :

• Take Backup of your Android phone contacts, your apps and your accounts associated with it.
• Download the required files.
• Make sure Your Android device is at least 50% charged so that it can’t get switched off.
• Make sure that data cable is properly connected.
• Disable Anti virus and other apps.

 So, assuming that you have followed all the instructions mentioned above you now need to proceed further for procedure. 

If you want to install this ROM:

•  have to install Custom Recovery image for Galaxy fit

To update to DDKT3 follow the instructions in this link

galaxy fit S5670 update DDKT3 (2.3.6)

To install Custom Recovery image follow this link

Custom recovery image for Samsung galaxy fit s5670

Steps to install RazoDroid v4 on Samsung galaxy fit S5670


Step 1: Download  RazoDroiD v4.0 from here and to your sd card
Step 2: Power Off Your Phone.
Step 3: Boot in Recovery By Pressing and Holding Middle Button + Power Button Together.

• Touch wont work here,so Use Volume Keys to navigate and Middle Key for OK.

Step 5: Navigate to Mounts and Storage and select Format/system
Step 6: Wipe data/reset
Step 7: Navigate to Advance and select wipe Davik Cache
Step 8: Do a Data Reset.

Step 9: Than flash the rom through sd card ( navigate to< install zip from sdcard<choose zip from sdcard<--- razodroid_v4.0---(1).zip)

U R DONE...
ENJOY.................
Step 10: It will take some time for the first boot,maybe a few mins so dont panic!!
Step 11: I am not responsible for any bricking done!! :)

RazoDroid by rajrocks

Some of the IMP Features Of the Latest Rom are:

• Based on DDKT3(2.3.6) latest...!!!
• EXT4 File System
• Darktemor app2sd
• New lock screen
• Cf root
• Bravia engin
• Xload
• 14toogle
• Tw animation
• Screen off animation
• Screen on animation
• Oc support
• Oc kernel added
• Camera moded
• Can take pictures with the Power Button
• Galaxy SII Weather widget
• New icon pack
• Custom bootanimation
• Defult *customised* theme
• Ext4 script
• Msg limit increased n skins added
• Tweaks added 30+
• Miui music player added
• New google play
• All apps updated
• New tw
• Busybox(latest)
• Hard rooted
• Deodex
• Zip Aligned System Apps
• Sign all apk n zip
• Background image added
• Clock bug removed
• Downloading plug-in added
• Swipe To Clear Notification
• Battery saver Tweak
• Better Performance
• Battery Life increased
• Faster SDCARD Read/Write Speed
• Memory Hack

More custom roms to come so keep visiting....

How to install Custom Recovery Image(ClockWorkMod) in Samsung Galaxy Fit S5670

Custom recovery image on Samsung galaxy fit s5670

 Samsung galaxy fit s5670 users can now breathe easy as in the due course of this article we will be checking out on how to install the custom recovery image. The need for the installation of this recovery image is to install custom ROMs and to install the latest ICS Android 4.0 firmware in the form of Cyanogen Mod 9 firmware.

 Disclaimer: We mobtechzz should not be responsible in any manner if anything happens to your device as which is a very unlikely case if you follow each and every instruction carefully given in this article.

NOTE:

• In the process of custom recovery installation, the warranty will get void. To get back the warranty, you need to note down the current firmware you are on so that you can then install the same for regaining the lost warranty.
• To un root, you can apply with any of the stock firmwares. Once the device is un rooted, the warranty gets regained.

Prime Requisites :

• Take Backup of your Android phone contacts, your apps and your accounts associated with it.
• Download the required files.
• Make sure Your Android device is at least 50% charged so that it can’t get switched off.
• Make sure that data cable is properly connected.
• Disable Anti virus and other apps.

 So, assuming that you have followed all the instructions mentioned above you now need to proceed further for procedure.

Steps To Install custom recovery image On Samsung Galaxy FIT S5670

Step 1: Enable the USB Debugging in your device from the path  

               “Settings > Applications >Development > USB debugging " 

Step 2: Download HERE beni_cwm-5_v2.tar and  ODIN-BENI OPS

Step 3: Match the extracted files from the below shown screen capture, even if single file is missing then you need to check with the extraction or download process.

 Step 4: From extracted files, open Odin executable file and turn Off the phone so as to enter the device in the download mode.

 Step 5: Now, you need to enter the by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Just in case if the device boots in the normal mode then you will have to again try the process of entering into the download mode.

 Step 6: After entering the phone in the download mode, connect the device to the computer while keeping the Odin opened. Within a minute, the ID : COM section will turn yellow which will mean that all the drivers have been successfully installed and you are now ready to proceed to the next step.

Step 7: Click on the “OPS” option in the Odin to select the below mentioned file, tick on “One Package” option and then select the One Package option as mentioned below

• OPS – BENI_v1.0.ops
• One Package – beni_cwm-5_ext4_v2

Step 8: Click start and wait for few minutes it gets restarted

NOW you have successfully installed custom recovery image you can check it by booting into Recovery mode there will be a change in the recovery mode.(The recovery mode can be entered by holding the Power button + the Home key button (the middle button). While holding these both buttons.)

Flashing Nokia frimware using Phoenix Service Software

Flashing/updating/reinstalling guide to Nokia BB5 mobiles using Phoenix Service Software

Some time you have seen that some bugs are there in your mobile like your mobiles calculator is not running properly or browser not opening etc. it may some problem in your firmware and can be solved by updating or reinstalling your firmware.There are different types of methods like using nokia software updater, by using nokia care,By using phoenix suite for store to update nokia firmware. but best of them is using phoenix method.many peoples are facing problem to update nokia phone software and some got fails so today i am here to guide you step by step with phoenix method so lets start.

Disclaimer: We mobtechzz should not be responsible in any manner if anything happens to your device as which is a very unlikely case if you follow each and every instruction carefully given in this article.

1. Requirements

• A Computer Having At least 512 MB ram
• Nokia original Usb cable for your phone
• Phoenix Software (Flashing Software) Get It From Below Download Link With Resume Support

DOWNLOAD HERE

2. Find And Download Latest firmware For Your Mobile

To download latest frimware of your handset CLICK HERE and select your device and download suitable frimware

or

download firmware using NAVIFRIM

3. Lets Start To Update/Reinstall Firmware

• First of all it is recommended to remove all Nokia tools from your pc so please remove Nokia Pc Suite, Nokia Software Updater, Etc
• Reboot Your Pc
• Install Phoenix 2012 (Don’t Install With out Rebooting Your Pc) don’t Change in Directory Name
  
• Install Firmware You have downloaded in step 2 where you have installed Phoenix (C:\Program Files\Common Files\Nokia\DataPackage\ProductsAnd Here Create Folder Named RM-XXXX) Where XXXX is your firmware number dial *#0000# and check RM-XXXX
• Now Plug-in Your Mobile To Pc And Wait Till it install Drivers
• Now Open Phoenix And Go-to File>>Scan Product refer below screen shot

 Now It Will Show Your Device Info

Now Navigate to Flashing>>Firmware Update Have a Look of Below Screen Shot

• Now as you click on Firmware Update you will see following screen it will ask you to enter Product Code then click on browse

• As You Click on Browse You will see following screen Just Select Your Product Code From it 

• As You Select The Code following screen will appear to you then click on Refurbish and flashing will start 

• Refer Following Screen Its Shows Flashing in Progress

• After That You will get Conformation message like this 

• After Completing flashing process you can see following screen then click on close

Now you have successfully flashed your NOKIA mobile .

This is the standard procedure for all BB5 based NOKIA handsets for flashing.

Steps To update Samsung galaxy fit s5670 with official gingerbread DDKT3 2.3.6

Update Samsung Galaxy Fit S5670 with Official Gingerbread DDKT3 2.3.6

We have come up with another stock mod which is Indian update of 2.3.6 DDKT3 followed by DDKT1 For Galaxy Fit.There might be some bugs in 2.3.6 DDKT1 such as USB Debugging (Many Users Reported that they had USB debugging problem with DDKT1) that’s why Samsung decided to roll out DDKT3 in which bugs are fixed.Further we will show how to update your device with the stable and official firmware of Gingerbread 2.3.6 dubbed as DDKT3. Please note that this firmware update of Gingerbread 2.3.6 is official update for all the users of INDIA region though can be applied by all the users irrespective of the region you are from.

 Disclaimer: We mobtechzz should not be responsible in any manner if anything happens to your device as which is a very unlikely case if you follow each and every instruction carefully given in this article.

Prime Requisites :

• Take Backup of your Android phone contacts, your apps and your accounts associated with it.
• Download the required files.
• Make sure Your Android device is at least 50% charged so that it can’t get switched off.
• Make sure that data cable is properly connected.
• Disable Anti virus and other apps.

 So, assuming that you have followed all the instructions mentioned above you now need to proceed further for procedure.

Steps To Install Android 2.3.6 Gingerbread DDKT3 Firmware On Samsung Galaxy FIT S5670

Step 1: Enable the USB Debugging in your device from the path  

               “Settings > Applications >Development > USB debugging " 

Step 2: Download HERE Gingerbread 2.3.6 DDKT3 and  ODIN-BENI OPS  

Step 3: Match the extracted files from the below shown screen capture, even if single file is missing then you need to check with the extraction or download process.

 Step 4: From extracted files, open Odin executable file and turn Off the phone so as to enter the device in the download mode.

 Step 5: Now, you need to enter the by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Just in case if the device boots in the normal mode then you will have to again try the process of entering into the download mode.

 Step 6: After entering the phone in the download mode, connect the device to the computer while keeping the Odin opened. Within a minute, the ID : COM section will turn yellow which will mean that all the drivers have been successfully installed and you are now ready to proceed to the next step.

Step 7: Click on the “OPS” option in the Odin to select the below mentioned file, tick on “One Package” option and then select the One Package option as mentioned below

• OPS – BENI_v1.0.ops

• One Package – S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5

Step 8: Click on Start and then wait for the device to get restarted. Once the device gets restarted, you will be asked to enter the Google Account credentials. Once you see the home screen in your phone, disconnect the connected phone and turn Off the phone so as to enter the phone in the recovery mode.

Step 9: RECOVERY MODE

• The recovery mode can be entered by holding the Power button + the Home key button (the middle button). While holding these both buttons.

• Once you finish the above process, you now need to proceed to select “++++ Go Back ++++” and select the option of “Reboot System Now” for restarting the device.
• In case you have any problems after restarting.....  HOME SCREEN problems then go back to recovery mode and select “ Wipe data/factory reset” and “Wipe Cache partition”(note: touch screen does not work in recovery mode use volume+,- button to scroll. home button to select)

Note: Just in case if you face any issues in the process of firmware update or if the process gets interrupted, you will then have to reapply the whole process of firmware update. Also, don’t forget to restore back the data which you have backed up so that you can easily use all the services like before your phone was in.

• The updated firmware can be checked from the path of Settings > About Phone > Firmware Version where you will find the version of Android OS where it will show DDKT3 2.3.6. Also, if you are unable to access the internet after the firmware update then you will have to re configure the APN Settings which can be done from the path Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names.

Now, you have successfully updated your Samsung Galaxy FIT S5670 with the latest version of Gingerbread 2.3.6 firmware. Do let us know just in case if you face any issues in the process of updating as we will try our level best to sort out the same.

How to Do Backup & Restore Data & App On Your Android Smart Phone

HOW TO DO BACKUP OF CURRENT CUSTOM ROM & APPS
1. Reboot your phone in recovery mode. Manually press Home plus Power Button (Depending upon your hardware, it might be different combination).

2. Go to Backup and Restore option in your recovery and select Backup option.

3. Wait till the backup process is finished. It may take about 4-10 minutes depending upon your applications and data.

4. Reboot your device when it is finished.

You have now successfully done a Nandroid Backup of your smart phone. It is always a good idea to do a nandroid backup once a month. If you ever get system issues or instability problem just restore the previous back up you made when your system was stable and working just fine. Also, it is necessary to do and nadnroid backup when you are about to flash a tweak or anything that may change system settings. This might cause you to lose data that were installed after the backup was done. The backup is however stored in your sdcard inside backup folder of clockworkmod folder.

That was all about nandroid backup, now i will tell you how you can perform a simple application backup. As you can see the applications and data installed after a backup are gone/deleted when you restore it at a later time. So, it is always a good practice to do a nandroid backup once a month or two and also backup your data and app regularly at least twice a week. It will ensure that all your data and app are safe and secure.

 

HOW TO DO RESTORE OF CURRENT CUSTOM ROM & APPS
1. Reboot your phone in recovery mode. Manually press Home plus Power Button (Depending upon your hardware, it might be different combination).

2. Do A Wipe Cache & Factory Data Reset .

2. Now, Go to Backup and Restore option On CWM recovery and select Restore option.

3. Select That Backup File (Which Current Rom You Backup) Wait till the Restore process is finished. It may take about 4-10 minutes depending upon your applications and data.

4. Reboot your device when it is finished.

Official CM7 20120418 NIGHTLY

HOW TO FLASH Official CM7 20120418 NIGHTLY 

Disclaimer : Do It At Your Own Risk!

Note : Those who have Gingerbread OS and any Custom Recovery installed on their device can skip Step 1 and Step 2. Also, those who have any custom rom installed can skip both Step 1 and 2.

Upgrade your firmware to Gingerbread using Odin Multidownloader v4.38

2. Install CWM custom recovery available for Samsung Galaxy Mini/Pop/Next from here

3. Download Official CM7 20120418 NIGHTLY Full Release  "update-cm-7-20120418-NIGHTLY-tass-signed.zip

4. Copy the downloaded file to your sd-card.

5. Reboot your device to Custom Recovery (Press Home + Power Button).

6. [Optional but, Recommended] Do a Nandroid Backup of your current rom.

7. Go on Choose Install Zip From Sd Card>>Choose Zip From SD Card option and then select the file (named:update-cm-7-20120418-NIGHTLY-tass-signed.zip you downloaded from above.  

8. Wait till the rom is flashed/installed on your device. Once done, Wipe Data and Wipe cache from recovery menu.

9. Reboot your device from your recovery main menu... (THANKS TO SQUAZONE FOR THIS ROM)


DOWNLOAD LATEST GAPP FROM HERE APK

          FOR THOSE WHO WANT ICS THEME ON  Official CM7 20120418 NIGHTLY 

Download This ICS theme form here APK (THANKS TO"ronaldvalles" for this AWESOME THEME)